品牌
*注：按产品型号，可检索常见问答、样本、证书等信息。
ModBUS I/O Digital I/O modules 订购编号:
点击这里发送询价请详细填写一下内容，包括产品原产国、品牌完整名称以及您所能得到的所有信息，这将有助于我们准确迅速的报价。非常感谢！
| EZ-10-D-IN: | 10-CH digital input module ModBUS | |
| EZ-10-D-OUT: | 10-CH digital output module ModBUS | |
| EZ-D-IN: | 5-CH digital input module ModBUS | |
| EZ-D-IO: | 5-CH digital output module ModBUS | |
| EZ-D-OUT: | 8-CH, 6 digital input / 2 digital output control module ModBUS | |
| EZC-16DI-8DO: | 16-CH digital input - 8-CH digital output module ModBUS / CANopen | |
| EZC-24DI: | 24-CH digital input module ModBUS / CANopen | |
| EZC-24DO: | 24-CH digital output module ModBUS / CANopen |
EZ-10-D-IN
10-CH Digital Input module / RS485
EZ-10-D-IN is a 10 digital inputs with self-powered 16V DC shared negative pole. EZ-10-D-IN has 8 built-in inputs with 16 bit contactor with 100 Hz max. frequency and 2 inputs with 32 bit contactor with 10 kHz max. frequency. At 10 kHz Z-10-D-IN assures frequency measurement. For 100 Hz input the module measures period, frequency and TON, TOFF. The module offers possibility to set total counters for forward or backward counting. EZ-10-D-IN gives also overfl ow indication for each total counter.
product information
product information
| rder code : | EZ-10-D-IN | |
| Description: | 10-CH Digital Input module / RS485 | |
| Power Supply: | 10..40 Vdc; 19..28 Vac (50-60 Hz) | |
| Isolation: | 1.500 Vac | |
| Inputs: | 10-CH (reed, proximity, pnp, npn, contatto pulito) isolated, common negative, self-powered 24 Vdc, protected from transients up to 600 W/ms | |
| Counters: | 8 inputs @ 16 bit, max freq. 100 Hz; 2 @ 32 bit, max freq. 10 KHz | |
| Communication: | RS485 2 wire, ModBUS RTU slave protocol | |
| Dimensions: | 17,5 x 100 x 112 [mm] | |
| Mounting: | 35 mm symmetrical DIN (46277) rail |
EZ-10-D-OUT
10-CH digital output module / RS485
The EZ-10-D-OUT is used to drive N.10 MOSFETS from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The digital output max load is 0,5 A (inductive) and 0,5 A (resistive) with maximum switch-on / switch-off cycle frequency of 2 cycles/second. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
product information
product information
product information
| Order code : | Z-10-D-OUT | |
| Description: | 10-CH digital output module / RS485 | |
| Power supply: | 10..40 Vdc / 19..28 Vac | |
| Outputs: | 10-CH optoisolated channels, mosfet semiconductor | |
| Outputs protection: | From short circuit and overvoltage with 6..40 Vdc range | |
| Diagnostic: | Channel status, programmable | |
| Serial communication: | RS485 MosBUS RTU | |
| Dimensions: | 17,5 x 112 x 100 mm | |
| Mounting: | 35 mm symmetrical 46277 DIN rail |
EZ-D-IN
5-CH Digital input module / RS485
The EZ-D-IN is used to interface 5 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocol MODBUS RTU through the RS485 serial interface. A 16 bit counter is available on each input, the maximum frequency input is 100 Hz and it is possible to set one input as a fast counter with a maximum frequency of 10kHz. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.
| Order code : | EZ-D-IN | |
| Description: | 5-CH Digital input module / RS485 | |
| Power supply: | 10..40 Vdc; 19..28 Vac (50-60 Hz) | |
| Inputs: | 5 CH (reed, proximity, pnp, npn, contact) with common negative, self powered 24 Vdc, isolated, protected from transient up to 600 W/ms | |
| Counters: | 4 @ 16 bit, max frequency 100 Hz; 1 @ 32 bit, max frequency 10 KHz | |
| Anti rebounce filter: | Settable from 5 to 250 ms | |
| Communication: | RS485 a 2 fili, ModBUS RTU slave protocol | |
| Dimensions: | 17,5 x 100 x 112 [mm] | |
| Mounting: | 35 mm guide DIN 46277 |
EZ-D-IO
8-CH, 6 digital input - 2 digital outputs control module
EZ-D-IO has N.6 digital inputs, N.2 SPST relays, capacity of 2Aac, 250 Vac. It can be used as simple Input/Output module or, through dip-switches, is possible to acticate special functions to drive motors, pneumatic and motorised valves.The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
product information
product information
| Order code : | EZ-D-IO | |
| Description: | 8-CH, 6 digital input - 2 digital outputs control module | |
| Power supply: | 10..40 Vdc, 19..28 Vac | |
| Isolation: | 1,5 kVac (input/other circuits), 3,75 kVac (output/other circuits) | |
| Input: | 6-CH reed, proximity, pnp, npn, contact etc. | |
| Output: | 2-CH relay 5 A, 250 Vac | |
| Operating mode: | I/O slave, time based control logic | |
| Control logic: | IEC 61131-2 type 1 motor control, valves, limit switch, alarms | |
| Protocol: | ModBUS RTU slave |
EZ-D-OUT
5-CH Digital output module / RS485
The EZ-D-OUT is used to drive N.5 SPST relays from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The instrument has N.5 SPST relays, capacity resistive loading of 5 A 250Vac , inductive loading of 2 A. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
product information
product information
| Order code : | EZ-D-OUT | |
| Description: | 5-CH Digital output module / RS485 | |
| Power Supply: | 10..40 Vdc; 19..28 Vac (50-60 Hz) | |
| Outputs: | 5-CH SPST relay, settings NO/NC | |
| Safe state: | Settable at start up or in case of communication fault, programmable delay fron 50 to 250 ms | |
| Communication: | RS485 2 wire, ModBUS RTU slave protocol | |
| Dimensions: | 17,5 x 100 x 112 [mm] | |
| Mounting: | 35 mm symmetrical DIN (46277) rail |
EZC-16DI-8DO
16 CH digital input - 8 CH digital output CANopen / ModBUS
The EZC-16DI-8DO is an 16 CH input / 8 CH output mixed module. The inputs have 32-bit counters / 10 kHz max frequency, mosfet Outputs with shared negative pole. The communication protocols are CANopen or ModBUS RTU (protocol selectable through dip-switch). A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.
product information
product information
| Order code : | EZC-16DI-8DO | |
| Description: | 16 CH digital input - 8 CH digital output CANopen / ModBUS | |
| Power Supply: | 10..40 Vdc, 19..28 Vac | |
| Max power consumption: | 2,5 W | |
| Isolation: | 1,5 kVac (3 way) | |
| Response time: | 1,2..2,5 ms | |
| Operating temperature: | -10..+65°C | |
| Dimension: | 35 x 100 x 112 mm | |
| Digital input: | 16 channels; IEC EN 61131-2; Nr 8 counters @32 bit (max 10 kHz); TPDO < 1 ms | |
| Digital output: | 8 channels, 32 bit (max 10 kHz); mosfet, max 500 mA per channel, Vext 5..30 Vdc; RPDO < 1,25 ms |
EZC-24DI
24 CH digital input CANopen / ModBUS
EZC-24DI is used to interface N.24 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocols CANopen or ModBUS RTU (protocol selectable through dip-switch). It disposes of 32 bit counters (N.8), maximum frequency input is 10 KHz. A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.
product information
product information
| Order code : | EZC-24DI | |
| Description: | 24 CH digital input CANopen / ModBUS | |
| Power Supply: | 10..40 Vdc, 19..28 Vac | |
| Max power consumption: | 2,5 W | |
| Isolation: | 1,5 kVac (3 way) | |
| Response time: | 2,5 ms | |
| Operating temperature: | -10..+65°C | |
| Dimension: | 35 x 100 x 112 mm | |
| Channels: | 24 | |
| Polarity: | EN 61131-2 sink (npn) | |
| Counters: | 8 @ 32 bit (max 10 kHz) | |
| Pulse width: | Min 250 μs | |
| TPDO: | < 1 ms |
EZC-24DO
24 CH digital output CANopen / ModBUS
EZC-24DO is used to drive N.24 MOSFETS from all of the control systems which are able to communicate by the protocols CANopen or ModBUS RTU (protocol selectable through dip-switch). The digital output max load is 0,5 Awith ON/OFF delay of 1ms. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
product information
product information
| Order code : | ZC-24DO | |
| Description: | 24 CH digital output CANopen / ModBUS | |
| Power Supply: | 10..40 Vdc, 19..28 Vac | |
| Max power consumption: | 2,5 W | |
| Isolation: | 1,5 kVac (3 way) | |
| Response time: | 1,2 ms | |
| Operating temperature: | -10..+65°C | |
| Dimension: | 35 x 100 x 112 mm | |
| Channels: | 24 | |
| Output type: | Mosfet, max 500 mA per channel | |
| RPDO: | < 1,25 ms |
工程咨询
数据中心
采油平台
发电厂
核电厂
输配电
政府及军事设施
冶金矿业
制造业
可再生能源
铁路运输系统
