标准超小型微动开关,可进行灵活定制,如封装、连接或执行端子等,该型号完全可根据用户要求进行定制
Descriptions |
Approvals |
EN 61058-1 Upon request: UL 61058-1 |
Housing | Glass fiber reinforced |
Plunger | PES |
Membrane | Fluorsilicone elastomer |
Mechanism Contacts | Change-over, Snap action coil spring mechanism with stainless steel spring |
Contact material | Fine Silver, Gold contact upon request |
Termination |
Cable or wires in standard and length to be defined PVC -20°C to 70°C SI -40°C to 105°C PUR -40°c to 90°C Other cable material and length upon request PTFE, RXL,... |
Type of conductor |
Flexible conductors Solder terminal with provisions for securing the conductor by mechanical means and providing circuit continuity by soldering |
Cable outlet |
Standard side of button Other side upon request |
Actuator | Overall dimensions in stainless steel, flat lever , roller, simulated roller |
Degree of protection |
IP67 |
Class of protection |
I 250V II / III 24V |
Pollution degree | 3 |
Proof tracking index PTI | 250V |
Rated Impulse Withstand Voltage | 2.5 kV |
Glow-wire temp. | 850°C |
Micro-disconnection | μ |
Contact-gap | 0.40 mm |
Dimensions |
DIN 41 635, form B 20 x 16 x 6.5 mm |
Power rating UL / EN 61058 (Resistive Load) |
5RA 250VAC 25'000 cycles 2RA 250VAC 50'000 cycles 0.1RA 24VDC 50'000 cycles |
Operating range force | 1.0 to 2.5 N, depending actuator |
Operating temperature range | -40°C to 105°C |
Mechanical life | 10 x 106 |
Standardised Actuator - Upon request other actuator |
Type 0 : Pin plunger - without lever | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
2.5 0.5 9.3 ± 0.2 9.0 ± 0.2 0.6 0.05 |
|
Type 7JA : Flat lever - position A | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
1.0 0.15 12.0 ± 0.4 10.6 ± 0.4 1.2 0.40 |
|
Type 7JB : Flat lever - position B | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
2.0 0.3 10.3 ± 0.4 9.7 ± 0.4 0.6 0.30 |
|
Type 8JAL : Roller - position A | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
1.0 0.15 17.2 ± 0.4 16.0 ± 0.4 1.2 0.40 |
|
Type 8JBL : Roller - position B | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
2.0 0.3 15.7 ± 0.4 15.1 ± 0.4 0.6 0.30 |
|
Type 8JGSA : Simulated roller - position A | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
1.0 0.15 14.7 ± 0.4 13.5 ± 0.4 1.2 0.40 |
|
Type 8JGSB : Simulated roller - position B | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
2.0 0.3 13.2 ± 0.4 12.6 ± 0.4 0.6 0.30 |
Standard wiring diagramm |
Diagram | Couleur | |
Direct Action |
1 : Brown 2 : White 4 : Green |
Ordering information |
MP43 | 0 | - | 7JA | / | 325 | / | 100 | PVC | |
Contact material 0 : Silver contact 1 : Gold contact |
|||||||||
Actuator 0: Basic switch - pin plunger 7JA : Flat lever - A position 7JB : Flat lever - B position 8JAL : Roller - A position 8JBL : Roller - B position 8JGSA : Simulated Roller - A position 8JGSB : Simulated Roller - B position |
|||||||||
325 : 3 wiring section 0.25 mm2 350 : 3 wiring section 0.50 mm2 (PVC only) |
|||||||||
Length of cable in centimeter (cm) | |||||||||
Material of cable PVC: Polyvinyl Chloride PUR: Polyurethane SI: Silicone |