Silent RunningTM SR1000 船舶涂层

048

Silent Running SR 1000 是一种符合VOC标准的水性产品，可轻松的喷涂。已通过美国海岸警卫队认证编号：No.164.106/41/0; 164.112/141/0; 164.117/4/0；欧盟认证编号：NO.1408/11 ；IMO国际海事组织A.653(16)号决议达到或超过第10节对于可燃性和毒性的检测和MSC.61(67) 号决议；这种隔音涂层可用于船体内部，纵梁，发动机床、舱壁、天花板、舱口、发动机箱、船首推进器、HVAC单元、工程管道、发电机盖和机械外壳。SR1000是“永久性”涂层，对所有金属、玻璃纤维和木材具有出色的附着力。Silent Running的关键是涂层可多层覆盖，达到隔音效果，涂层厚度至少为1mm（取决于基材的厚度）。

Silent Running 涂层干燥需要约1小时，1小时后可以重新覆盖涂层。涂层表面污物可用水快速清洁。Silent Running干燥后是灰白色，可使封闭区域变亮。Silent Running比标准泡沫砖应用更方便，由于是永久性涂层，使用时间更长久，大约是传统泡沫产品成本的1/2和重量的1/3。

Silent Running比传统的隔音方法更有效，不仅仅因为它的化学成份，而且无论是任何角度弯曲的表面都能完全粘附在基板上。不会吸收水份和化学物质，并且能够承受海洋环境中的极端条件。可承受温度-60OC~120OC。对于典型的应用，可以降低6-8dBa(约60%的噪音)，建议最小应

用厚度基于基板厚度（1加仑涂层可喷涂1mm厚约3.72m2）。因此噪声和振动对全体船员的影

响将大大减少，整体工作环境得到改善，船舶的寿命也因此延长。

SR 1000 特性
水性、无毒

优秀的粘附力

永久性涂层

不易燃，防火材料

环境温度：-60OC~120OC；

表面污物可用水快速清洁；

可用喷雾器、刷子或滚轴，便捷的施工.

节省人力、空间和时间；

对气体、石油和大多数化学物质具有耐受性；
干燥后表面是坚硬的，并保持良好的延展性；
基板膨胀或弯曲而导致的裂纹,涂层也不会碎裂

应用：

Military

SR 1000 Military

Apply Silent Running SR 1000 to flight decks, catapult room, machinery spaces, and duct work.
Reducing vibration and noise helps to reduce crew fatigue and ensure a safer working environment.

Power

Use Silent Running SR 1000 in engine rooms, hatch covers, hull, bulkheads, bow thruster, duct work, fuel tanks, generator enclosures, air conditioner enclosures. Engine rooms, once Silent Running is dry and cured (dry time is about 1 hour) it is resistant to most chemicals and will not dissolve in water. Thus it can be used in the bilge, stringers, bulkheads, hull, ceiling and hatches. Apply to hull area surrounding the bow thruster to reduce the vibration and noise caused by its operation. On fuel tank(s) it will reduce the drumming and low frequency rumble associated with metal tanks as the fuel level goes down.

Silent Running can be applied to air conditioning fan enclosures and duct work to help reduce the mechanical and fan noise generated from its operation. Coat the generator enclosure including the surface it is mounted on to help reduce the sound of it running.

Sail

SR 1000 Sail

Use on engine covers, generator enclosures, bulkheads even in an outboard lazarette.

Silent Running SR 1000 has been shown to reduce the noise and vibration from both inboard and outboard motors. Silent Running is significantly lighter than traditional lead foams thus saves weight for the same given area covered.

Also due to only being approximately 1/16” thick once all coats have been applied, it saves space as well.

Fishing

SR 1000 Fishing
Use in crew quarters, mechanical spaces, pump enclosures, engine rooms, machinery covers, fuel tanks, ice machines are among some of the areas. By applying to the crew quarters and living spaces, Silent Running SR 1000 will help to reduce the noise and vibration which can contribute to crew fatigue during down time. Coating fuel tanks will help to reduce the drumming and low frequency rumble associated with metal tanks as the fuel level is reduced. Machinery enclosures, covers and spaces can all radiate noise and coating them will help to minimize the amount that is transferred out to other places on board.

Yacht Designers

SR 1000 Yacht Designers
During design stage, specify which areas will receive Silent Running SR 1000 to help reduce noise prior to it becoming a problem. Utilizing advanced sound software, designers can now predict where the vibration and sound will be concentrated and proactively incorporate Silent Running into their design and specs.

Yacht Builders

SR 1000 Yacht Builders

Perfect time to install Silent Running SR 1000 is during the hull build to best utilize the availability of open space prior to the installation of engine(s), pumps, steering controls, tanks, plumbing, wiring and all the gear and accessories that go into a hull during the build. Saves time and money with a quick and easy application. There is no cutting and no scrap pieces that just get thrown out. Conforms to all surface shapes, flat, curved or compound.

Cruise Ships

SR 1000 Cruise Ships

For added guest comfort apply Silent Running SR 1000 to engine rooms, decks, dining areas and all other guest spaces where noise could be a problem. Apply to duct, air plenums, fan shrouds and any other noise generating equipment spaces or covers.

Reducing noise helps to provide a more acceptable degree of comfort for both passengers and crew alike.

Commercial Ships

SR 1000 Commercial Ships
Apply Silent Running SR 1000 to decks, crew quarters, galley spaces, engine rooms and living spaces. Can also be applied to duct work, bulkheads and machinery and pump rooms.

Reducing noise exposure helps to provide a safer working environment, such as the ability to hear audible alarms and reduce noise induced hearing loss.
New SOLAS regulations require certain compartments on ships that are 1,600 gross tons and larger and contracted on or after July 1, 2014 to be in compliance.

ugs

SR 1000 Tugs

Apply Silent Running SR 1000 to engine rooms, bulkheads, crew quarters, winch motor areas.
Reducing noise exposure helps to provide a safer working environment, such as the ability to hear audible alarms and reduce noise induced hearing loss.

Transportation

SR 1000 Transportation
Use Silent Running SR 1000 in engine rooms, decks, bulkheads, metal stairs, duct work and machinery covers. Apply to duct, air plenums, fan shrouds and any other noise generating equipment spaces or covers.